Master-force 241-0431 Instrukcja Operatora Pobierz pdf (Strona 12)

OPERATION

TO ATTACH BATTERY PACK (Fig. 2)

CAUTION: When placing the bat-

tery pack on the tool, be sure that the

raised rib on the battery pack aligns

with the groove on the saw and the

latches snap into place properly. Im-

proper assembly of the battery pack

can cause damage to internal com-

ponents.

1. Lock the trigger switch in the

“OFF” position.

2. Align the raised rib on the battery pack with the grooves on the bottom of

the saw, and then attach the battery pack to the saw.

NOTE: Make sure that the latch on the battery pack snaps into place and the

battery pack is secured to the tool before beginning operation.

TO DETACH BATTERY PACK (Fig. 2)

1. Lock the trigger switch in the “OFF” position.

2. Depress the battery release buttons located on the front of the battery

pack to release the battery pack.

3. Pull the battery forward to remove from the tool.

VARIABLE SPEED TRIGGER SWITCH (Fig. 3)

Your reciprocating saw is equipped

with a trigger switch to turn the saw

on and off and to control the speed.

1. To start the saw, depress the

lock-off button and then squeeze

trigger switch.

2. To stop the saw, release the

trigger switch and allow it to

return to the “OFF” position.

3. To vary the speed, simply

increase or decrease the

pressure on the trigger switch. The more tightly the trigger switch is

squeezed, the higher the speed.

LED WORKLIGHT (Fig. 4)

Your reciprocating saw has a built-in LED worklight for illuminating the

cutting area. To activate the LED worklight, squeeze the lock-off button and

depress the trigger switch to start the saw.

DETACH

ATTACH

Fig. 2

Fig. 3

Lock-off

button

Trigger

switch

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Komentarze do niniejszej Instrukcji

Brak uwag

Master-force 241-0431 Instrukcja Operatora Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Elektronarzędzia Master-force 241-0431